Information entnommen von http://www.npl.co.uk/npl/reference/si_units.html Stand 17.Januar 1997
The name Système International d'Unités (International System of Units) with the international abbreviation SI was adopted by the Conférence Générale des Poids et Mesures (CGPM) in 1960. It is a coherent system based on the seven base units (CGPM 1960 and 1971) listed in table 1 below.
| Base quantity | Name | Symbol |
|---|---|---|
| length | metre | m |
| mass | kilogram | kg |
| time | second | s |
| electric current | ampere | A |
| thermodynamic temperature | kelvin | K |
| amount of substance | mole | mol |
| luminous intensity | candela | cd |
The SI is a coherent system of units, which is to say that any derived unit is an exact multiple of the base units. Specific names and symbols have been given to several derived SI units .
The primary definations of the SI base units are in French. Their current definitions, along with an English translation, are given below:
The metre is the length of the path travelled by light in vacuum during a time interval of
The kilogram is the unit of mass; it is equal to the mass of the international prototype of the kilogram.
Note : This internatational prototype is made of platinum-iridium and is kept at the International Bureau of Weights and Measures, Sévres, France.
The second is the duration of
The ampere is that constant current which, if maintained in two straight parallel conductors of infinite length, of negligible circular cross-section, and placed 1 metre apart in vacuum, would produce between these conductors a force equal to
The kelvin, unit of thermodynamic temperature, is the fraction 1/273.16 of the thermodynamic temperature of the triple point of water.
The 13th CGPM (1967, Resolution 3) also decided that the unit kelvin and its symbol K should be used to express both thermodynamic temperature and an interval or a difference of temperature.
In addition to the thermodynamic temperature (symbol T ) there is also the Celsius (symbol t ) defined by the equation t = T - T 0 where
2°. Lorsqu'on emploie la mole, les entités élémentaires doivent être spécifiées et peuvent être des atomes, des molécules, des ions, des électrons, d'autres particules ou des groupements spécifiés de telles particules. (14th CGPM (1971), Resolution 3).
1. The mole is the amount of substance of a system which contains as many elementary entities as there are atoms in 0.012 kilogram of
2. When the mole is used, the elementary entities must be specified and may be atoms, molecules, ions, electrons, other particles or specified groups of such particle.
Note : In this definition, it is understood that the
The candela is the luminous intensity, in a given direction, of a source that emits monochromatic radiation of a frequency 540×10 12 hertz and has a radiant intensity in that direction of (1/683) watt per steradian.
The Si derived units with special names are listed in table 2.
| Quantity | Name | Symbol | Expression in SI base units |
|---|---|---|---|
| plane angle | radian [ 1 ] | rad | m m -1 |
| solid angle | steradian [ 1 ] | sr | m 2 m -2 |
| frequency | hertz | Hz | s -1 |
| force | newton | N | |
| pressure | pascal | Pa | |
| energy, work, quantity of heat | joule | J | |
| power, radiant flux | watt | W | |
| electric charge, quantity of electricity | coulomb | C | |
| electric potential, potential difference, electromotive force | volt | V | |
| capacitance | farad | F | |
| electrical resistance | ohm | ||
| electrical conductance | siemens | S | |
| magnetic flux | weber | Wb | |
| magnetic flux density | tesla | T | |
| inductance | henry | H | |
| Celsius temperature | degree Celsius | °C | K |
| luminous flux | lumen | lm | |
| illuminance | lux | lx | |
| activity (of a radionuclide) | becquerel | Bq | s -1 |
| absorbed dose [ 3 ], specific energy imparted, kerma | gray | Gy | |
| dose equivalent [ 3 ] | sievert | Sv |
Notes:
The radian and steradian are classified as supplementary units (11th CGPM(1960), Resolution 12).
At the time or the introduction of the International System, the 11th CGPM left open the question of the nature or these supplementary units. Considering that plane angle is generally expressed as the ratio between two lengths and solid angle as the ratio between an area and the square or a length, the CIPM (1990) specified that in the International System the quantities plane angle and solid angle should be considered as dimensionless derived quantities. Therefore, the supplementary units radian and steradian are to be regarded as dimensionless derived units which may be used or omitted in the expressions for derived units.
| Zurück zum Inhaltsverzeichnis . | L.Änderung 26.September.1997 |